NEED HELP? GIVE US A CALL
877.333.7108
• Tape Measure
• Utility Knife
• Phillips Head Screwdriver
•
1
⁄
8
" &
7
⁄
32
" Drill Bits/Drill
• Adjustable Wrench
• Bleach
• Safety Glasses
• Pencil
• Masking Tape
• Pan or Bucket
Tools recommended for installation:
Note: We recommend using an approved or certified professional if drilling is required.
Basic plumbing knowledge is recommended prior to installing this unit.
Read the entire manual to familiarize
yourself with the system and determine
the best location for installation. Check
and comply with all local plumbing codes.
1. Prior to installation, turn off the cold
water shut-off valve under the sink.
2. Temporarily place system and tank into the
sink cabinet (or desired location) to ensure
adequate space and proper positioning.
Remove system and tank from under
your sink to begin installation.
Prepare Site and Plan for Installation
Note: If you have metal drain pipes, consult a plumber for installation of drain connection.
WARNING:
We recommend using an approved or certified professional.
Proper installation is the responsibility of the installer. Product failure due
to improper installation is not covered under the warranty.
INSTALLATION GUIDE
2
16"
(40.6 cm)
12.875"
(32.7 cm)
6"
(15.2 cm)
11"
(27.9 cm)
12"
(30.5 cm)
