6
OPERATION CONTROLS & FUNCTIONS
Receiver
q
STD/UPDATE:
This switch is reserved for factory use only.
w
RS-232 OUT:
Connect to a serial controllable device for the extension of RS-232 signals.
e
LAN:
Connect to an Ethernet device or to your local network as appropriate.
r
POWER LED:
This LED will illuminate to indicate the unit is on and receiving power.
t
LINK LED:
This LED will illuminate solid when both Transmitter and Receiver are connected and communicating with each other
properly.
y
DC 48V:
Plug the 48V DC power adapter into this port and connect it to an AC wall outlet for power.
u
IR1 BLASTER:
Connect to the supplied IR Blaster cable for IR signal transmission. Place the IR Blaster in direct line-of-sight of the
equipment to be controlled.
i
IR2 EXTENDER:
Connect to the supplied IR Extender cable for IR signal reception. Ensure that remote being used is within the direct
line-of-sight of the IR Extender.
o
CAT5E/6/7 IN:
Connect to a compatible HDBaseT
™
Transmitter with a single CAT5e/6/7 cable for transmission of all data signals.
a
HDMI OUT:
Connect to an HDMI TV, monitor or amplifier for digital video and audio output.
A
NEU
VIDEO
