17
RS-232 & Telnet Commands
COMMAND
DESCRIPTION OF PARAMETER
SET AUTOMATION EVENT N1 UART
WAIT N2 SEC
Set the length of time to wait after an Automation Event’s RS- 232 response has been
activated before ANY other Automation Event can be detected.
Available values for
N1:
1
[Power on]
2
[Out A source active]
3
[Out A source lost]
N2
= 1 ~ 300
[Wait time in seconds]
NOTE:
If both an RS-232 and CEC event is activated by the same Automation Event,
the longer of the 2 wait times will be used.
GET AUTOMATION EVENT N1 UART
WAIT
Show the wait time for the specified Automation Event’s RS-232 response.
Available values for
N1:
1
[Power on]
2
[Out A source active]
3
[Out A source lost]
SET AUTOMATION EVENT N1 UART
COMMAND N2
Set the RS-232 command string to send when the specified Automation Event is
activated.
Available values for
N1:
1
[Power on]
2
[Out A source active]
3
[Out A source lost]
N2
= {Command} [Max 32 characters]
GET AUTOMATION EVENT N1 UART
COMMAND
Show the RS-232 command string to be sent when the specified Automation Event is
activated.
Available values for
N1:
1
[Power on]
2
[Out A source active]
3
[Out A source lost]
SET AUTOMATION EVENT N1 CEC N2
Enable or disable the specified Automation Event’s CEC response.
Available values for
N1:
Available values for
N2:
1
[Power on]
2
[Out A source active]
3
[Out A source lost]
ON
[Event enabled]
OFF
[Event disabled]
GET AUTOMATION EVENT N1 CEC
Show the current state of the specified Automation Event’s CEC response.
Available values for
N1:
1
[Power on]
2
[Out A source active]
3
[Out A source lost]
SET AUTOMATION EVENT N1 CEC
DELAY N2 SEC
Set the delay time that the specified Automation Event must continue to be true before
sending the defined CEC command.
Available values for
N1:
1
[Power on]
2
[Out A source active]
3
[Out A source lost]
N2
= 1 ~ 300
[Delay in seconds]
GET AUTOMATION EVENT N1 CEC
DELAY
Show the delay time for the specified Automation Event’s CEC response.
Available values for
N1:
1
[Power on]
2
[Out A source active]
3
[Out A source lost]
A
NEU
VIDEO
