15
RS-232 & Telnet Commands
COMMAND
DESCRIPTION OF PARAMETER
GET OUT A MASK
Display the current output mask setting.
SET OUT AUTO MODE N1
Enable or disable automatic source switching.
Available values for
N1:
0
[Auto switch disabled]
1
[Auto switch enabled]
GET OUT AUTO MODE
Show the current auto switch mode state.
GET IN PORT NUMBER
Show the number of inputs on the unit.
GET OUT PORT NUMBER
Show the number of outputs on the unit.
GET IN N1 SYNC STATUS
Show the current sync status of input
N1.
N1
= 1 ~ 2
[Input number]
Available Responses:
0
[No sync]
1
[Sync is present]
GET OUT A SYNC STATUS
Show the current sync status of the output.
Available Responses:
0
[No sync]
1
[Sync is active]
SET ALL IN EDID MODE N1
Enable or disable using the same EDID for all inputs.
Available values for
N1:
ON
[All mode]
OFF
[Appoint mode]
GET ALL IN EDID MODE
Show the current state of the EDID assignment mode.
SET ALL IN EDID N1
Set the EDID to use when set to
“All mode”.
Available values for
N1:
1
[8-bit/1080p/2CH LPCM]
2
[8-bit/1080p/MCH]
3
[12-bit/4K@30/2CH LPCM]
4
[12-bit/4K@30/MCH]
5
[12-bit/4K@60/2CH LPCM]
6
[12-bit/4K@60/MCH]
7
[User 1]
8
[User 2]
9
[Sink A]
GET ALL IN EDID
Show the current
“All mode”
EDID.
SET IN N1 EDID N2
Assign EDID
N2
to input
N1
in
“Appoint mode”
.
N1
= 1 ~ 2
[Input number]
Available values for
N1:
1
[8-bit/1080p/2CH LPCM]
2
[8-bit/1080p/MCH]
3
[12-bit/4K@30/2CH LPCM]
4
[12-bit/4K@30/MCH]
5
[12-bit/4K@60/2CH LPCM]
6
[12-bit/4K@60/MCH]
7
[User 1]
8
[User 2]
9
[Sink A]
GET IN N1 EDID
Show the EDID currently assigned to input
N1.
N1
= 1 ~ 2
[Input number]
GET IN EDID LIST
List all available EDID sources.
SET EDID N1 NAME N2
Set the name of User EDID
N1
to
N2
.
N1
= 7 ~ 8
[EDID number]
N2
= {Name}
[16 characters max]
NOTE:
Only User EDIDs can be renamed.
A
NEU
VIDEO
