13
A
NEU
VIDEO
TELNET CONTROL
Telnet Control
Before attempting to use Telnet control, please ensure that both the unit and the PC/laptop are connected to the same active network.
To Access Telnet
Windows 7
Click
START
, type
“cmd”
in the search field and press
ENTER.
Windows 10
1. Open
“Control Panel”.
2. Open
“Programs and Features”.
3. Select the
“Turn Windows features on or off ”
option.
4. Check the
“Telnet Client”
box.
5. Click
“OK“
. A box will appear that says
“Windows Features”
and
“Searching for required files”
. When complete, the Telnet client
should be installed in Windows.
In Mac OS X
Click
Go > Applications > Utilities > Terminal.
Once in the Command Line Interface (CLI) type
“telnet”
followed by the IP address of the unit (and the port number if it is non-standard)
and then hit
“Enter”
. This will connect us to the unit we wish to control. Type
“help”
to list the available commands. See below for
reference.
NOTE:
The default IP address is 192.168.1.50. If the IP address is changed then the IP address required for Telnet access will also
change accordingly. Telnet support requires the use of a compatible HDBaseT
™
Receiver with an Ethernet port.
