25
Telnet Control
This will bring us into the unit which we wish to control. Type
“help”
to list the available commands.
Type
“IPCONFIG”
to show all the IP configurations. To reset the IP, type
“RSTIP”
and to use a static IP, type
“SETIP”
(For a full list of
commands, see Section RS-232 & Telnet Commands).
Note: Commands will not be executed unless followed by a carriage return. Commands are NOT case-sensitive. If the IP is
changed then the IP Address required for Telnet access will also change accordingly.
A
NEU
VIDEO
