26
Web GUI Control
On a PC/Laptop that is connected to the same active network as the Matrix, open a web browser and type the unit’s
“IP address”
on the
web address entry bar. The browser will display the unit’s Status, Control and User Setting pages.
Click on the
“Control”
tab to control power, input/output ports, EDID and reset mode.
Click on the
“User Setting”
tab to allow you to reset the IP configuration. The system will ask for a reboot of the unit each time any of
the settings are changed. The IP address needed to access the WebGUI control will also need to be changed accordingly on the web
address entry bar.
A
NEU
VIDEO
