A.J.Antunes VCT-200 Series, Manual

Page: 3 / 28

RAPID TOASTER VCT-200
3 P/N 1010710 Rev. N 02/13
McDonald’s
Letter
Code*
Description Configuration
C
H
R
Commercial Cord
Harmonized Cord
Rockbestos Cord
(H)C** CEE 7/7, 16
Amp., 250 VAC
(Assembly Only).
D #330P6W, 30
Amp., 250
VAC.,Pin & Sleeve
(H)I** IEC-309, 16 Amp.,
250 VAC., Pin &
Sleeve (Assembly
Only).
R L6-30P, 30 Amp.,
250 VAC., Right
Angle Twist Lock.
S L6-30P, 30 Amp.,
250 VAC., Straight
Twist Lock.
SPECIFICATIONS
CAUTION
All electrical connections must be in accordance
with local electrical codes and any other appli-
cable codes.
WARNING
ELECTRICAL SHOCK HAZARD. FAILURE TO
FOLLOW THE INSTRUCTIONS IN THIS MANUAL
COULD RESULT IN SERIOUS INJURY OR DEATH.
• Electrical ground is required on this appliance.
• Do not modify the power supply cord plug. If
it does not fit the outlet, have a proper outlet
installed by a qualified electrician.
• Do not use an extension cord with this appli -
ance.
• Check with a qualified electrician if you are in
doubt as to whether the appliance is properly
grounded.
Supplied Voltages:
Electrical Cord & Plug Configurations
Model Designation
TYPE OF POWER CORD
H = HARMONIZED
C = COMMERCIAL
R = ROCKBESTOS
TYPE OF PLUG
C = CEE 7/7
D = Domestic Pin and Sleeve
I = International Pin and Sleeve
R = Right Angle Twist-Lock
S = Straight Twist-Lock
VCT-200XX
Model
Number
Manufacturing
Number
Voltage Wattage Amperage HZ Approximate
Toasting Time
in Seconds
VCT-200RD 9200500 208, 220-240 4185, 4682-5570 20.1, 21.3-23.2 60 17
VCT-200RR 9200502 208, 220-240 4185, 4682-5570 20.1, 21.3-23.2 60 17
VCT-200RS 9200504 208, 220-240 4185, 4682-5570 20.1, 21.3-23.2 60 17
VCT-200RS 9200512 200-240 3869-5570 19.3-23.2 60 10
VCT-200RD 9200500 208, 200-240 4185, 4682-5570 20.1, 21.3-23.2 60 10
VCT-200RR 9200502 208, 200-240 4185, 4682-5570 20.1, 21.3-23.2 60 10
VCT-200RS 9200504 208, 200-240 4185, 4682-5570 20.1, 21.3-23.2 60 10
* Used in Model Designation
** Indicates that the plug comes supplied with a Harmonized Cord.
R
R
30
A.
2
5
0
V
.
R
R
3 0
A . 2
5 0 V.
Toasting Time Change
In early 2003, there was a change in the toasting time and
Bun Thickness settings. The toasting time was changed
from 10 seconds to 17 seconds and the Bun Thickness
settings were changed from “B & 3” to “D & 5.” This field
“Toast Quality Kit” was installed on models VCT-200RD (Mfg.
#9200500), VCT-200RR (Mfg. #9200502), and VCT-200RS
(Mfg. #9200504). Not all toasters were changed to a 17
second toasting time. To determine if your toaster is 10 or
17 seconds, look at the Bun Thickness Control Adjustment
Label located on the left end panel. If the background color is
YELLOW, the toasting time is 17 seconds. If the background
color is GRAY, the toasting time is 10 seconds. If your toast-
er has been changed to a 17 second unit, follow all instruc-
tions and information with a 17 second heading.