8x8 Inc 6755i Page 116 User Manual Download

Page: 116 / 141

Model 6755i Series IP Phone User Guide

—

111

dition

al Fe

atu

Enable/Disable Call Waiting

The call waiting feature notifies the user on an active call of a new incoming call.
You can disable the call waiting feature, so that the new incoming call is
automatically rejected by the phone with a busy message.

If you disable call waiting on the phone, and the user is on a call, any further
incoming calls receive busy unless

Call Forward Busy

Call Forward No

Answer and Busy

is configured on the phone (for information on

"Call Forwarding"

, see

page 97

.) It then forwards the call according to the rule

configured. The phone can only:

• transfer the currently active call

• accept transferred calls if there no active calls.

If call waiting is disabled:

• Intercom calls are treated as regular incoming calls and are rejected.

• pre-dialing with live dialpad disabled still accepts incoming calls.

• the

Incoming Call Interrupts Dialing

parameter is ignored because the

incoming call is automatically rejected (for information on

"Incoming Call

Interrupts Dialing"

see

page 115

• the Missed Calls List does not get updated with details of calls.

• the Blind Transfer feature on the phone may not work if two calls are made to

the phone at one time.

You can disable call waiting using the configuration files or the 8x8 Web Phone
UI.

Enabling/Disabling Call Waiting

Use the following procedure to enable or disable Call Waiting on the IP phone.

8x8 Web Phone UI

Note:

Call Waiting is enabled by default.

Summary of Contents for 6755i














































































































































Search results

Summary of Contents for 6755i

Reviews:

Related manuals for 6755i

Brands by name

Popular brands

8x8 Inc 6755i, User Manual

Search results

Summary of Contents for 6755i

Reviews:

Related manuals for 6755i

Brands by name

Popular brands