then save, click “FTP upgrade” to upgrade host.
22.5 Timing to Restart
Enable the system auto-restart function, set restart time then save. When the DVR host time reach
the set time, it will shows “Schedule time out, whether restart at once?”. Choose“Yes” to
confirm restart and choose “Cancel” to cancel restart. If you do no choice, the system will auto-restart
after 20 seconds.
22.6 Password Reset
When user forget the DVR host administrator password, please recover password by following steps:
1. Shutdown DVR host. Cut off the power supply.
2. Remove the cover screws to open the case cover.
3. Find the 3 feet pin near the SCM in back of front panel.
4. Use the jumper cap to make the 1, 2 feet in a short circuit state. (The jumper cap default in 2, 3
foot when leave factory).
5. Turn on the power to start the host, the front panel buzzer will beep, indicating that the
password has been cleared to the factory defaults.
6. Shutdown the host and cut off power supply again.
7. Unplug the jumper cap and return the jumper cap to default 2, 3 feet.
8. Fixed on the chassis cover, password reset is complete.
22.7 Web Login Instructions
•
Make sure that DVR is powered on and connected to the LAN network.
•
Choose DHCP option in DVR’s Network menu to automatically obtain the network settings
from your local router. You can also manually set the IP, network mask, gate, and http port
( default http port :81) to match your LAN settings. Makes sure that DVR and PC are in the
same network segment.
•
Use „Network diagnosis” (Settings->Network->Network diagnosis) to test your DVR network
connection.
