8level DVR-AHD-081-1 Installation And Operation Manual Download Page 15 | Manualshive

Page: 15 / 39

8level DVR-AHD-081-1 Installation And Operation Manual Download Page 15

•

Trigger Record: Select the channel number which you want to set linkage.

•

Alarm output: If alarm output setting is blue color means it will alarm when have alarm
events. If is grey color mean will not alarm output.

•

Email linkage: Select “Email linkage” means DVR system can send the alarm information to
your email box which have set when motion alarm happens.

•

PTZ preset point: System support the function of dome will turn to preset point when motion
happens.

13.2 Sensor

Sensor alarm recording setting steps:

Step1: Enter “Main Menu” -> “Record Setup” -> “Record Para.” interface to set the channel pre-
record time and delay-record time.

Step2: Enter “Main Menu” -> “Alarm Setup” -> “Sensor” , then the interface is the right figure

above: Step3: Select Sensor type: Normal on or Normal off.

Step4: Select sensor number.

Step5: Set sensor deploying time (the specific setting please refer to schedule record).

«
...
13
14
15
16
17
...
»

Summary of Contents for DVR-AHD-081-1








































Reviews:

No comments