Step6: Linkage setting: Set Trigger Record, Screenshot linkage, Alarm output, Email linkage,
PTZ preset point.
•
Trigger Record: Select the channel number which you want to set linkage.
•
Screenshot linkage: Choose the channel which for screenshot linkage and set the
alarm screenshot at screenshot parameter menu.
•
Alarm output: If alarm output setting is blue color means it will alarm when have alarm
events. If is grey color mean will not alarm output.
•
Email linkage: Select “Email linkage” means DVR system can send the alarm information
to your email box which have set when sensor alarm happens.
•
PTZ preset point: System support the function of dome will turn to preset point when
alarm happens. (Note: PTZ preset point value range 1-255, 255 means close)
13.3 Alarm Output
Enter “Main Menu” -> “Alarm Setup” -> “Alarm Output” interface as the right picture:
You can set alarm during time, audio, buzzer, full screen and alarm output deploying
time. l Alarm during time: Alarm detection time 2~300 seconds. System default as 30
seconds. l Audio: If you select it, the alarm sound will be send out from the audio output.
l Buzzer: The buzzer in mainboard will beep after have alarm.
l Full screen: When preview image have multi-channels, if system detect alarm, the alarm channel
will full screen display.
l Alarm output deployment time: System default set alarm output deployment time is everday 00:00-
23:59.
