8e6 Technologies HL-002-006 Page 42 Quick Start Manual Download

Page: 42 / 94

6 e

nterprise

eporter

uick

tart

uide

8e6 menu

When “

8e6 >

” is selected, the following menu items display on the screen:

Current Patch Level

IP / LAN1 >

Gateway

DNS 1 >

DNS 2 >

Host Name >

Regional Setting (Time Zone, date, time)

Reset Admin Console Password

Reboot >

Shutdown >

NOTE:

Navigation tips in the 8e6 menu:

• Use the up / down arrow key to scroll up / down the menu

• Press the checkmark key to choose the current selection

• Press the “X” to go back to the previous screen

Make a selection from the menu, and press the checkmark key to go to that screen.

Current Patch Level

When the Current Patch Level option is selected, “Enterprise Reporter” and the version

number of the currently installed build displays.

IP / LAN1

When the IP / LAN 1 option is selected, the IP / LAN 1 screen displays with the following

menu items:

Configure LAN 1 IP

Change LAN1 Netmask

A. Choose

Configure LAN 1 IP

and press the checkmark key to go to the Configure

LAN 1 IP screen.

B. Use the up / down keys to increase / decrease the current value, and the left / right

arrow keys to navigate across the line.

C. Press the checkmark key to accept your entry and to return to the previous screen.

D. Choose

Change LAN1 Netmask

and press the checkmark key to go to the Change

LAN1 Netmask screen.

E. Use the up / down keys to increase / decrease the current value, and the left / right

arrow keys to navigate across the line.

•

Summary of Contents for HL-002-006































































































Search results

Summary of Contents for HL-002-006

Reviews:

Related manuals for HL-002-006

Brands by name

Popular brands

8e6 Technologies HL-002-006, Quick Start Manual

Search results

Summary of Contents for HL-002-006

Reviews:

Related manuals for HL-002-006

Brands by name

Popular brands