- 14 - - 14 -14
Rev D
14
6
Monitoring Operation
Display Modes:
Normal Mode
,
Sleep Mode
, and
User Set Mode
6.1
Normal Mode
The
Normal Mode
displays the operational status of the light source.
This is the default display after the 3 minute warm-up screen.
“Normal Mode”
layout for the display is shown below:
LAMP HOURS = 835
TRANSMISSION = 100%
SHUTTER = OPEN
6.2
Sleep Mode
Sleep Mode
can be activated while the unit is in
Normal Mode
by
holding the green button for 5 seconds until the unit powers off.
Repeat the sequence to awaken the unit. Re-initialization will happen
as the bulb starts up again so the standard 3 minute warm-up will still
apply.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
