manualshive.com logo in svg

4Links Diagnostic SpaceWire Interface, User Manual, Page: 6 / 47

Share
Download
4Links Diagnostic SpaceWire Interface User Manual Download Page 6

 

 

Page 6 

1

 

Introduction 

The 4Links Diagnostic SpaceWire Interface (DSI) is a rack-mounted transparent interface that allows SpaceWire 
packets to be sent and received over Ethernet via a TCP/IP socket connection.  It provides remote access to a 
SpaceWire network for software simulation of devices, remote monitoring and distributed system integration 
activities.  In addition, it provides for the detailed analysis of SpaceWire components, including routing switches. 

Each packet received may be time-tagged to a resolution better than 2ns.  There is no limit to the length of the 
SpaceWire packets that can be transferred.  Abnormal data ("errors") may be injected and monitored.  The low-
level SpaceWire link start-up and operating behaviour may be modified for diagnostic purposes.  Concurrent 
outputs on several links may be synchronized.  Waveform captures of the SpaceWire link signals may be triggered 
by a very wide set of events. 

The Ethernet port provides a galvanically isolated connection with a cable length of up to 100m.  Attaching this to 
the Internet allows world-scale connections. 

Ethernet and TCP/IP provide a standard interface mechanism that is supported by all major operating systems, so 
no additional software drivers are required. 

The basic DSI-RG408 unit provides data transfers and may be extended with options to provide for time codes, 
event reporting, waveform capture and time-tags.  Most options can be added as a simple field upgrade by 
replacing the removable memory card on the front panel of the unit. 

This equipment is available with two, four or eight active ports which may be mounted on the front panel (see the 
picture above) or on the rear panel. 

1.1

 

Product Features 

Feature 

Description 

1U support 

3U support 

SpaceWire 

SpaceWire Link rate (Mbps) 

400Mbps 

400Mbps 

Ethernet 

Ethernet Speed 

1Gbps 

1Gbps 

Ports 

Number of SpaceWire ports 

2/4/8 

2 

Power 

Input supply to unit 

24V DC @48W 

12V DC @15W 

1.2

 

Product Options 

Option 

Description 

1U support 

3U support 

TT 

Time Tags 

Option 

No 

ER 

Event/Error Reporting 

Option 

Standard 

EI 

Event/Error Injection 

Option 

Standard 

EW 

Event/Error Waveforms 

Option 

Standard 

SO 

Synchronised Outputs 

Option 

No 

CO 

Controlled Outputs 

Option 

No 

OD 

Output Disable 

Option 

No 

OE 

Output Enable 

Option 

No 

 

 

 

Summary of Contents for Diagnostic SpaceWire Interface
















































Reviews:

No comments