A1/A2
A1/A2
A1/A2
A1/A2
2
1
2
1
1
为保证航空无线电台电磁环境的要求，（禁止在以机场跑道中心线两侧各
10公里、跑道两端各20公里范围）以及民航航路、航线。停止使用各类模
型、无人机。在国家有关部门发布的禁飞区域，停止使用各类模型、
无人机。
4D-M1
四轴飞行器使用说明书
1. List of accessories included:
2. Name of each part of aircraft:
Aircraft ×1
Fan blade ×4
Lithium
battery ×1
Screw-
driver ×1
Operating
Instructions ×1
Motor
Shell
LED lights
Battery
Fan blade clip
Fan blade
Camera
3. Wind blade installation diagram:
3.2 Loosen the screw, open the two fan blades and
the connecting parts, and remove the fan
blades for replacement.
(when A1/A2 fan blade is
broken, replace A1/A2, and so do to B1/B2 fan blade,
error in replacement will cause that it can’t take off.)
USB charging
cable for the
remote control
×
1
USB charging cable
for the battery ×1
3.1 Unscrew the screw and remove the fan blade.
Note: The fan blade is printed with A1/A2
B1/B2. Please install it correctly
according to the instruction, otherwise it
cannot take off.
4. Camera installation / removal:
4.1 Press the buckle on bottom of the
camera and take out the camera in
the direction indicated by the arrow.
4.2 As shown in the figure below, press the
buckle on the bottom of the camera,
install it in the direction of the arrow, and
pay attention to fasten the buckle.
Tips: The camera needs to be used with the real-time transmission APP. For the
download process, please refer to the APP manual. For the camera function
description, please refer to the APP content.
02
