Speed regulation
Video
Servo adjustment
Take pictures
USB adapter
Desktop PC
2
1
2
1
3
6. Lithium battery charging instructions:
7. Name of each part of the remote control:
5. Lithium battery installation:
5.1 Press the left and right buckles of the
battery, and push the battery into the
battery holder.
5.2 Check after installation to ensure that the
battery is installed in place.
6.1 Press the buckles on the left and right
sides of the battery.
6.2 Take out the battery in the direction
indicated by the arrow.
6.3 Charging: Insert the USB port of the white USB charging cable into the USB port of the computer (or use the
output: 5V 2A power adapter), and connect the other end of the USB charging cable to the battery socket.
When the battery is charging, the green light of the battery flashes from up to down in sequence, and the battery
power indicator is constantly on when the battery is fully charged. The battery is fully charged in about 10 hours.
Tips: When the transmitter emits a sound of "Di Di" and there is one light left in the battery, the battery needs to be charged.
Headless mode button: Press this button to enter the headless mode, the indicator light on
the rear arm of the aircraft flashes, and press again to exit.
Return button: Press this button to return the flight, and press it again to cancel.
One-key recycling / switch between left and right hand mode (long press)
One-key return
Up / down / left turn/ right
turn operation joystick
Power switch
One-key take-off /
one-key landing
Geomagnetic calibration
Forward / backward / left side
fly / right side fly joystick
Headless mode (short press) /
switch indoor mode (long press)
Laptop
Mobile power
USB power
socket
03
