2
1
2
3
Figure 2
12.5 Geomagnetic calibration operation
Figure 1
Figure 4
Figure 3
12.3 Turn on the remote control (default mode)-press the
power switch button of the remote control (step
1) and turn on the remote control, the power
indicator will flash. The throttle lever is pushed up to
the top (step 2) and then to the bottom (step 3), the
code matching will complete and the indicator of the
remote control will be always on.
12.4 Horizontal calibration operation:
Push the left and right joysticks on the remote control to the lower right corner at the same time, and the lights
on the aircraft will flash quickly. When the lights on the aircraft flash slowly, it means the calibration is
complete, when the remote control will emit a sound of beep (Figure 1).
APP operation: Click the "Set more" icon in the APP interface, and operate following the text prompt after
entering, and it can also be horizontally calibrated. When the APP indicates that the
calibration is complete, it will automatically proceed to the next step (Figure 2).
Note: The calibration must be completed only when the aircraft is placed on a horizontal plane.
1. Short press the
geomagnetic
calibration button
until the light on the
aircraft flashes quickly.
2. Horizontal clockwise rotation -
Pick up the aircraft horizontally
and rotate clockwise until the
device emits a sound of "beep",
and the horizontal calibration is
completed.
3. Rotate the aircraft clockwise with the
tail upwards: pick up the aircraft with
the nose being vertically downwards
and rotate clockwise until the remote
control emits a sound of "beep" when
the light flashes slowly, which means
the guide calibration is completed.
APP operation: In the interface of "Set more", according to the text prompt and operation steps, the guide
calibration can also be done (Figure 4). When the APP prompts that the guide calibration is
complete, it will automatically enter the start to fly interface.
06
