Picaso Processor
Datasheet
©
2017 4D Labs Semiconductors
Page 25 of 27
www.4dsystems.com.au
16.
Specifications and Ratings
ABSOLUTE MAXIMUM RATINGS
Operating ambient temperature............................................................................................................ -40°C to +85°C
Storage temperature ................................................................................................................................ -65°C +150°C
Voltage on VCC with respect to GND ....................................................................................................... -0.3V to 4.0V
Maximum current out of GND pin ..................................................................................................................... 300mA
Maximum current into VCC pin......................................................................................................................... 250mA
Maximum output current sunk/sourced by any pin ........................................................................................... 4.0mA
Total power dissipation ........................................................................................................................................ 1.0W
NOTE: Stresses above those listed here may cause permanent damage to the device. This is a stress rating only and
functional operation of the device at those or any other conditions above those indicated in the recommended
operation listings of this specification is not implied. Exposure to maximum rating conditions for extended periods
may affect device reliability.
RECOMMENDED OPERATING CONDITIONS
Parameter
Conditions
Min
Typ
Max
Units
Supply Voltage (VCC)
3.0
3.3
3.6
V
Operating Temperature
-40
--
+80
°C
External Crystal (Xtal)
--
12.00
--
MHz
Input Low Voltage (VIL)
VCC = 3.3V, all pins
VGND
--
0.2VCC
V
Input High Voltage (VIH)
VCC = 3.3V, non 5V tolerant pins
0.8VCC
--
VCC
V
Input High Voltage (VIH)
All GPIO pins, RX0 and TX0 pins
0.8VCC
--
5.5
V
GLOBAL CHARACTERISTICS BASED ON OPERATING CONDITIONS
Parameter
Conditions
Min
Typ
Max
Units
Supply Current (ICC)
VCC = 3.3V
--
50
90
mA
Internal Operating Frequency
Xtal = 12.00Mhz
--
48.00
--
MHz
Output Low Voltage (VOL)
VCC = 3.3V, IOL = 3.4mA
--
--
0.4
V
Output High Voltage (VOH)
VCC = 3.3V, IOL = -2.0mA
2.4
--
--
V
A/D Converter Resolution
XR, YU pins
8
--
10
bits
Capacitive Loading
CLK1, CLK2 pins
--
--
15
pF
Capacitive Loading
All other pins
--
--
50
pF
Flash Memory Endurance
PmmC Programming
--
10000
--
E/W
ORDERING INFORMATION
Order Code: Picaso
Package: TQFP-64, 10mm x 10mm
Packaging: Trays of 160 pieces