VISIX S-Series Network Camera
|
USER MANUAL v6.0
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
54
NOTE:
Manual Stops
of
Limit Type
is prior to
Scan Stops.
When you set these two limit
types at the same time,
Manual Stops
overrides
Scan Stops
.
3.
Click the PTZ control buttons to find the left/right/up/down limit stops; you can also call the defined
presets and set them as the limits of the speed dome.
4.
Click
Set
to save the limits or click
Clear
to clear the limits.
5.
Click
to save the settings.
CONFIGURING INITIAL POSITION
Purpose:
The initial position is the origin of PTZ coordinates. It can be the factory default initial position. The user can
also customize the initial position according to your own needs.
Customize an Initial Position:
Steps:
1.
Enter the Initial Position configuration interface:
Configuration
>
PTZ
>
Initial Position
Figure 5-28
PTZ Configuration
2.
Click the PTZ control buttons to find and set an initial position for the speed dome. The user can also call a
defined preset and set it as the initial position of the speed dome.
3.
Click
Set
to save the position.
Call/delete an Initial Position:
The user can click
to call the initial position or click
to delete the initial position and restore the factory
default initial position.
CONFIGURING PARK ACTIONS
Purpose:
This feature allows the camera to start a predefined park action (scan, preset, pattern and etc.) automatically
after a period of inactivity (park time).
NOTE:
Scheduled Tasks
function is prior to
Park Action
function. When these two
functions are set to the same time, only the
Scheduled Tasks
function takes effect.