3S CL260WS, Owner'S Instructions Manual

Page: 98 / 105

91
Chapter 9
Appendix - T
roubleshooting
■ Monitord
SYMPTOMS SOLUTIONS
The PC Screen continually
appears and disappears.
Check the connection between the TV and the computer and see if
the connector is locked.
A “There is no signal” message
appears.
■ This happens if the signal from the video card is too much
for the maximum resolution or frequency of the TV. Try to
set the maximum resolution or frequency for the TV.
■ See if power save mode of the PC functions properly. (This
is deactivates when any key is pressed or the mouse is
moved)
The screen looks like there is
water flowing on it.
Check the connector connected to the TV.
The screen is unclear and blurry. ■ Change the frequency and phase adjustment.
■ Change the Resolution and frequency to the standard limit.
(1024x768 @ 60Hz)
Unstable and flickering screen. The resolution and frequency of the PC’s Graphics Card should be
set within the TV’s range. Check the TV menu’s current mode and
standard mode and set it up again.
Some modes in standard mode
are not working.
■ Check the compatibility of the video card.
■ If it is not working for compatible hardware, try to upgrade
the driver of the graphics card.