![background image](http://html1.mh-extra.com/html/3onedata/iem615-series/iem615-series_user-manual_3170132009.webp)
Managed Industrial Ethernet Switch User Manual
3onedata proprietary and confidential 2
Copyright © 3onedata Co., Ltd.
⚫
Before remote configuration, please make sure the route between computer and
switch is reachable.
⚫
Before local configuration, please make sure the computer IP address is on the
same subnet as the one of switch.
Notes:
While first configuring the switch, if it is a local configuration mode, please make sure
that the network segment of current PC is 1.
E.g.: Assume that the IP address of the current PC is 192.168.5.60, change the
network segment "5" of the IP address to "1".
Operation Steps
Amendment steps as follows:
Open "Control Panel > Network Connection> Local Area Connection> Properties>
Internet Protocol Version 4 (TCP / IPv4)> Properties".
Change the selected "5" in red frame of the picture below to "1".
Click “OK”, IP address modifies successfully.
End.