Managed Industrial Ethernet Switch User Manual
3onedata proprietary and confidential 43
Copyright © 3onedata Co., Ltd.
Enter “1” in the “ID” textbox of “Group1”.
Set “Port 1” as “01” and “Port 2” as “02” separately.
Note:
“Port 1” and “Port 2” cannot be set to the same port.
Click “Apply”. Enter “Main Menu > System Management > Device Address”.
In the area of “reboot the device”, click “reboot”.
End.
8.1.2
Instance: create coupling ring
Instance
For example: creating coupling ring. Its basic architecture is shown as below:
Instance analysis
We can get the following picture by analyzing the coupling ring above.