![background image](http://html1.mh-extra.com/html/3onedata/iem615-series/iem615-series_user-manual_3170132053.webp)
Managed Industrial Ethernet Switch User Manual
3onedata proprietary and confidential 46
Copyright © 3onedata Co., Ltd.
Enter “2” into the “ID” textbox of “Group 1”.
Set “Port 1” and “Port 2” to “02” and “03” respectively.
Note:
“Port 1” and “Port 2” cannot be set to the same port.
For Device 101/102/103/104, choose “Slave” in the drop-down list of “Master-slave” of
“Group 1”.
For Device 100, choose “Master” in the drop-down list of “Master-slave” of “Group 1”.
Click “Apply”. Enter “Main Menu > System Management > Device Address”.
In the area of “reboot the device”, click “reboot”.
End.
Operation Step 3: configuring Ring 3 in WEB interface
Configuring Device 100, 101, 105 and 106 in the following steps respectively.
Choose “Main Menu > Redundancy > Rapid Ring”.
In the “Settings” area of “Rapid Ring” page, choose “Ring V3” as “Protocol of
Redundancy”.
Check the “Enable” box in the “Group 2”.
Choose “Couple” in the drop-down list of “Type” of “Group 2”.
Enter “3” into the “ID” textbox of “Group 2”.
Choose “1” in the drop-down list of “Coupling Port” of “Group 2”.
Choose “2” in the drop-down list of “Coupling Ctrl Port” of “Group 2”.
Click “Apply”. Enter “Main Menu > System Management > Device Address”.
In the area of “reboot the device”, click “reboot”.