PREHEAT menu (PLA/ABS/GUM)
Prepare
PLA/ABS/GUM 1
PLA/ABS/GUM 2
PLA/ABS/GUM 3
PLA/ABS/GUM ALL
PLA/ABS/GUM BED
•
Prepare: back to previous menu
•
1-2-3: sets the preheating temp for desired nozzle
•
ALL: preheat all the printer heaters
•
BED: preheat the printing bed
MOVE AXIS menu
Prepare
Move 10mm (XY)
Move 1mm (XYZE)
Move 0.1mm (XYZE)
•
Prepare: back to previous menu
•
Move 10mm: can move X or Y axis at 10mm steps
•
Move 1mm: can move X/Y/Z or current extruder at 1mm steps
•
Move 0.1mm: can move X/Y/Z or current extruder at 0.1mm steps
CONTROL menu
Main
Temperature
Motion
Store memory
Load memory
Restore failsafe
•
Back to main menu
•
TEMPERATURE: thermal settings
•
MOTION: movement settings
•
STORE MEMORY: save current settings – will be retained in case of power off
•
LOAD MEMORY: restore to previously saved settings – any unsaved change will be lost
•
RESTORE FAILSAFE: recall factory settings (do a STORE MEMORY if you want to retain them after powering off)
44
