58
4.15 Set prefix
Data format:
Length
Message
Source
Message
target
Reserve
Opcode
Command
beeper
Check
Sum
0x0B 0x04 0x31 0x00 0x50
Command:
%
SET
*Disable prefix
J1000
Space J1001
AIM + barcode
J1002
ID + barcode
J1003
ID + user-defined
barcode
J1006
User-defined prefix
+ ID + barcode
J1007
User-defined barcode
J1008
%
END
Note:
How to set user-defined prefix:
1. Set prefix mode;
2. Enter user-defined prefix mode;
3. Set user-defined prefix code (ASCII code).
Example:
Sets the prefix of the barcode “1234567” to “#Ab9”, namely the output
barcode is “#Ab91234567”.
1. The prefix mode is set to “User-defined barcode”;
2. Enter user-defined prefix mode, then scan the barcode of “#”, “A”, “b” and “9”
successively.
Summary of Contents for SC050
