31
4.10 Light delay after triggering the scanner caused by the trigger pin
Data format:
Length
Message
Source
Message
target
Reserve
Opcode
Command
Beeper
Check
Sum
0x0B 0x04 0x31 0x00 0x50
Command:
%
SET
*0ms F0300
100ms F03
01
200ms F03
02
500ms F03
05
900ms F03
09
1000ms F03
10
1500ms F03
15
2000ms F03
20
4000ms F034
0
6000ms
F0360
9900ms F03
99
%
END
Note:
1. The last two digits of command are decimal number. Minimum is 00 and maximum
is 99. Multiple is 100ms.
2. When trigger scan waiting time is 0ms with low level signal, it will continuously
scan unless decode or high level signal. There will be no overtime under this condition.
3. When trigger scan waiting time is not 0ms, it will start to scan with low level signal.
It will automatically time out and stop scanning if not decode in the required waiting
time.
Summary of Contents for SC050
