53
4.14.11 CODE 11
Code 11 is a variable length symbology with 1 or 2 optional check digits and non
printable start/stop character. If the data is 10 or less characters, one check digit is
used. If the data is more than 10 characters, then 2 check digits are used. The
following characters are supported: the digits 0 up to 9; the dash character “-”.
The first check digit is the modulo 11 sum of the weighted data character values. The
second check digit is the modulo 11 sum of the weighted data character values
including the first check digit. The check digits are not transmitted.
Command:
%
SET
*Disable IM000
Enable IM001
Not Check CD
IM100
*Check CD(one byte)
IM101
Check CD(two bytes)
IM102
Not Transmit CD
IM200
*Transmit CD
IM201
*Min barcode length
IM804
*Max barcode length
IM970
%
END
Summary of Contents for SC050
