4
1.5 Paper specification
Paper specification
203 dpi
Paper bin capacity
50 mm OD
Type of paper
Continuous paper, gap paper, black mark paper, perforated
paper
Winding type of paper
Outward winding of printing surface
Width of paper (label +
body paper)
Maximum 76 mm (3”)
Minimum 25.4 mm (1.0”)
Thickness of paper (label
+ body paper)
Maximum 0.25 mm (10 mil)
Minimum 0.06 mm (2.36 mil)
Axis size of paper roll
12.7 mm~25.4 mm (0.5”~1”)
Length of label
10~1778 mm (0.39”~70”)
Remark:
If you are using a label in the length less than 25.4mm (1"), it is
recommended to use a label paper with perforated lines on the
gap so as to tear apart easily.
Spacing height of gap
paper
Minimum 2 mm (0.09”)
Black mark height of black
mark paper
Minimum 2 mm (0.09”)
Black mark width of black
mark paper
Minimum 8 mm (0.31”)
