10
3.2 Install the paper roll
3.2.1 Install the paper roll
1. When installing the printing paper roll,
put the paper roll into the label supply shaft
and use the paper roll fixing sheet to fix the
paper roll at the supply shaft position.
2. Installation of battery. (Remove the
battery protective
film
before use;
otherwise, the battery will not provide the
power or the printer will not be turned on.)
Note: This series of paper sensors are stationary on the left side. Please make sure that the
gap (or black mark) of the paper passes through the sensor.
It is recommended that you shall calibrate the sensor again when you replace with
different types of label paper.
