22
Use this option to set the country code of the printer. When entering this option, the icon
“>” refers to the mode set currently.
Press FEED to select the mode to be set.
Press MENU to complete the setting.
Press POWER to cancel the setting and return to the previous menu.
5.1.2 Sensor setting
5.1.2.1 Sensor state
This option can be used to check the state of printer’s sensor. When entering this option,
the following message can be viewed.
5.1.2.2 Sensor calibration
This option can be used to set the detection mode of the sensor according to the label
paper to be used and the sensor required for calibration. It is recommended that the sensor
shall be recalibrated whenever the label paper is replaced.
A. Gap mode
Press SCROLL DOWN to select the type of sensor.
State
Exit
Sensor calibration
Sensor setting
