3nh YG Series, Operation Manual

Page: 9 / 32

6
Basic Mode: It is a basic sample test mode which belongs to single
measurement. The results will be saved automatically each time. Those data
can be used as the standard in Statistic Mode. It can display 5 sets test data
simultaneously.
Statistical Mode: It has statistical evaluation function and can multi-measure
a single sample. If open the difference switch, you can get the results
comparing with standard sample.
Continuous Mode: The continuous measuring times can be set to 99 and you
can set interval time. When press “Test” button, the instrument starts to
measure automatically and will stop measurements according to the settings.
If press “Test” button during the test, it will pause or end the current
measurement. This mode is used to measure large area samples and evaluate
homogeneity of large-area samples.
The Instrument has three measurement angles: 20°, 60° and 85°. You can
select it by clicking “Mode” in Main Menu or click icon( )to enter the
interface as shown in figure 7. (Remarks: Single angle gloss meter doesn't
have this option)
2.3.1 Basic Mode Measurement
This mode also comes with average measurement function. Details will
present on chapter 3.3.1 Basic Mode Average.
Back
Angle Select
OK
20 °
60 °
85 °
20 ° 60 °
60 ° 85 °
20 ° 60 ° 85 °
Figure 7 Angle Selection