3nh YG Series, Operation Manual

Page: 6 / 32

3
Figure 2 Separation Method
2. Operating Instruction
Figure 3 Standard Mode Measurement
2.1 Turn on/off
Long-press the switch button 3 seconds to turn on the instrument. The LCD
screen will display boot logo. After a few seconds, it will enter into the
measurement interface automatically, as shown in figure 3. Long-press the
switch button 3 seconds again, it will be turn off.
Basic Mode
T005
16:35 2015.10.23
20 60 85
T001
T002
T003
T004
T005
T102316
T102316
T102316
T102316
T102316
22.5
23.8
33.3
45.5
60.5
21.5
24.8
31.5
42.9
66.3
21.3
26.6
32.7
42.1
63.9
Delete
Menu
Attention: The method to separate the protective cover from the
instrument is shown in figure 2. Hold the instrument with one hand, the
other hand hold the protective cover, and then separate it according to the
“Open” mark. You only need to separate it from one side. Do not separate
it from two sides.