2
1. External Constructions
Figure 1 External Constructions
LCD Screen
Switch/
Measure Button
Indicator
Light
RS-232/
USB Interface
Protective Cover
(Calibration Plate)
LCD Screen:
Display measuring data and instrument operation navigation.
Switch/Measure button:
Long-press the button 3 seconds to turn on or turn off
the gloss meter. Short press the button is to measure.
Indicator Light:
When turning on, it will show green light. After startup, the
light is off. Low power and charging status will show red light. Fully charged will
show green light.
USB interface:
This interface is a common interface. The instrument
automatically judges the connection status. USB interface is used to connect
transfer data to PC. RS-232 interface is used to connect to the printer. USB
cable can connect power adapter and computer for charging the gloss meter
(specification for external adapter is: 5V 2A).
Protective Cover (Calibration plate):
It is to protective the measuring
aperture. Built-in calibration plate is used for instrument calibrating.
Hardware Reset Hole:
When the instrument has a disfunction (the instrument
has no reaction when press the measuring button or touch the screen), use a
pin to plug into the reset hole and keep it for 3s, the instrument will restart.
Reset
Hole
Summary of Contents for YG Series
Page 1: ...60 20 60 85 V2 0 OPERATION MANUAL...
Page 32: ......
