3M Steri-Vac GS5X Operator'S Manual Download Page 4 | Manualshive

Page: 4 / 89

background image

2

3

Globally Harmonized System (GHS) of Classification and Labeling of Chemicals

Specific Target Organ Toxicity (single exposure): Category 1
Specific Target Organ Toxicity (repeated exposure): Category 1
Specific Target Organ Toxicity (central nervous system): Category 3
Carcinogenicity: Category 1A
Reproductive Toxicity: Category 2
Germ Cell Mutagenicity: Category 1B
Eye Irritation: Category 2A
Skin Irritation: Category 2

Additional pictograms for Globally Harmonized System (GHS) of Classification and Labeling of Chemicals

Gas Cylinder ‑

Gas Under Pressure: Liquefied Gas

The gas cylinder pictogram applies to Globally Harmonized System (GHS) of Classification and Labeling of Chemicals The gas cylinder is not applicable where the European Union (EU)

Classification Labeling and Packaging (CLP) Regulation applies

Exclamation Mark ‑

Irritant, Acute toxicity (harmful) Respiratory Tract, Irritation

The exclamation mark in red border pictogram applies to Globally Harmonized System (GHS) of Classification and Labeling of Chemicals The exclamation mark in red border is not applicable

where the European Union (EU) Classification Labeling and Packaging (CLP) Regulation applies

Explanation of Symbols: Operator Manual

Danger:

Indicates a hazardous situation which, if not avoided, will result in death or serious injury

Warning:

Indicates a hazardous situation, which, if not avoided, could result in death or serious injury

Caution:

Indicates a hazardous situation, which, if not avoided, could result in minor or moderate injury

NOTICE:

Indicates a hazardous situation which, if not avoided, may result in property damage

Content Disclaimers

Pictorial Disclaimer

Sample printouts, graphics, displays and screens are for information and illustration purposes only and shall not be used for clinical or maintenance evaluations Data shown in sample printouts

and screens do not reflect actual names or test results

Hardware Disclaimer

The 3M™ Steri‑Vac™ Sterilizer/Aerator GSX Series hardware and software are subject to change The system images, screen images, hardware components, and hardware specifications

included in the manual may not match the system as installed In the event that hardware or software changes are made, 3M will verify their compatibility with the functionality described in

this document

Serial Number

For easy identification, each 3M™ Steri‑Vac™ Sterilizer/Aerator GSX Series has a unique serial number printed on the serial label (eg EA343434) found on the right side of the unit and

displayed on the printout for each cycle completed Record your serial number in this manual for future reference: ________________________________

«
...
2
3
4
5
6
...
»

Summary of Contents for Steri-Vac GS5X


























































































Reviews:

No comments

Related manuals for Steri-Vac GS5X

Brand: ABB Pages: 18

Brand: R-Tech Pages: 3

WJHD309A - DIGITAL DISK RECORDER

Brand: Panasonic Pages: 79

Brand: Zempire Pages: 2

Brand: Cannon Pages: 40

Brand: NARGESA Pages: 34

PowerXL DX-NET-ETHERNET2-2

Brand: Eaton Pages: 48

Power Xpert C445

Brand: Eaton Pages: 2

Brand: Jasco Pages: 2

Brand: LA Audio Pages: 9

Marathon Multi600

Brand: Saeyang Pages: 21

Brand: S&C Pages: 11

Brand: Goobay Pages: 6

Brand: Ganter Norm Pages: 20

Carestation 620

Brand: GE Pages: 268

Brand: GE Pages: 50

Brand: Eleiko Pages: 24

Brand: Horizon Fitness Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands