manualshive.com logo in svg

3M Steri-Vac GS Series, Operator'Smanual

The 3M Steri-Vac GS Series - Operator's Manual is a comprehensive guide that ensures safe and effective operation of our product. Download this essential manual for free from manualshive.com and unlock valuable insights on optimal settings, troubleshooting, and maintenance to maximize your experience with our top-of-the-line sterilization equipment.

Share
Download
background image

7

4.2.  First Aid

Inhalation:

Move person to fresh air and seek medical attention.

Skin or Clothing Contact:

Immediately wash with soap and water. Remove contaminated clothing and wash clothing before reuse. If signs/symptoms develop, seek medical attention.

Eye Contact:

Immediately flush with large amounts of water for at least 15 minutes. Remove contact lenses if easy to do so. Continue rinsing. Immediately seek medical attention.

If Swallowed:

Rinse mouth. DO NOT INDUCE VOMITING. Immediately seek medical attention.

Hazard statements of ethylene oxide (EO):

• 

Extremely flammable gas

• 

Contains gas under pressure, may explode if heated

• 

Toxic if inhaled

• 

Causes serious eye irritation

• 

May cause drowsiness or dizziness

• 

Suspected of damaging fertility or an unborn child

• 

May cause cancer

• 

May cause genetic defects

Consult the 3M™ Steri-Gas™ EO Gas Cartridge Safety Data Sheet (SDS) for additional information (www.3M.com).

5.  Warnings

 WARNING: To reduce the risks associated with fire and explosion:

3M™ Steri-Gas™ EO Gas Cartridges contain 100% ethylene oxide (EO) which is an extremely flammable gas and a liquid under pressure. Do not use near flame, electrical sparks, hot 
surfaces, or allow sources of ignition near the cartridges. Do not puncture cartridge outside the sterilization chamber. Do not incinerate cartridges. Exposure to temperatures above 150ºF 
(65.5ºC) may cause cartridge to burst.

3M

™

 Steri-Gas

™

 Cartridge Catalog Number

3M™ Steri-Vac™ Sterilizer GS Series Model

Nominal Net Weight of EO

4-100

GS5 Series

EO Net wt. 100 g. (3.52 oz.) 

8-170

GS8 Series

EO Net wt. 170 g. (5.99 oz.) 

Do not sterilize devices with energy sources which could create a spark in the sterilization chamber during the sterilization cycle. 

Always follow device manufacturer’s instructions for use (IFU), including device cleaning, drying, packaging, sterilization, and aeration.

Inspect display screen and cycle reports for error codes and listen for audible notifications (if enabled). Always take action with error codes as indicated in this manual.

Do not attempt to access any internal mechanisms of the 3M™ Steri-Vac™ Sterilizer/Aerator GS Series. Operators should not service the GS Series sterilizer as there are no user serviceable parts. 

 WARNING: To reduce the risk of shock due to hazardous voltage:

Do not attempt to access any internal mechanisms of the 3M™ Steri-Vac™ Sterilizer/Aerator GS Series. Operators should not service the GS Series sterilizer as there are no user serviceable parts. 

Customer must provide a properly grounded outlet (an earth ground) for installation as described in the installation requirements section of this manual. Do not use a detachable cord rated less 
than 15A.

Do not operate the 3M™ Steri-Vac™ Sterilizer/Aerator GS Series outside the environmental conditions as stated in this manual.

Use only 3M Health Care service personnel or authorized 3M service personnel for installation and maintenance. 

Do not modify any part of 3M™ Steri-Vac™ Sterilizer/Aerator GS Series. 

Summary of Contents for Steri-Vac GS Series





































































Reviews:

No comments

Related manuals for Steri-Vac GS Series

Kapriol 27977 Manufacturer'S Instruction And Information preview
27977
Brand: Kapriol Pages: 32
JABO 4236 Installation Manual preview
4236
Brand: JABO Pages: 4
Oemtools 24950 Operating Instructions And Parts Manual preview
24950
Brand: Oemtools Pages: 4
OMCA 760 Use And Maintenance Manual preview
760
Brand: OMCA Pages: 36
Salford 699 Assembly And Parts Manual preview
699
Brand: Salford Pages: 64
Ultimaker S7 Installation And User Manual preview
S7
Brand: Ultimaker Pages: 38
A&D UP-200 User Manual preview
UP-200
Brand: A&D Pages: 2
A&D RA3100 Omniace Instruction Manual preview
RA3100 Omniace
Brand: A&D Pages: 176
Facnor LS Installation Manual preview
LS
Brand: Facnor Pages: 33
Rapid Technic Mondo Operating Manual preview
Mondo
Brand: Rapid Technic Pages: 152
Olsen Logic Operation Manual preview
Logic
Brand: Olsen Pages: 58
UniPix ATMOS Operation Manual preview
ATMOS
Brand: UniPix Pages: 24
ubicquia 3i Installation Manual preview
3i
Brand: ubicquia Pages: 4
Cooper Surgical Wallach UltraFreeze Instructions For Use preview
Wallach UltraFreeze
Brand: Cooper Surgical Pages: 4
Lencarta SmartFlash 4 Instruction Manual preview
SmartFlash 4
Brand: Lencarta Pages: 6
Frick IDSC Installation Operation & Maintenance preview
IDSC
Brand: Frick Pages: 36
Ribimex Ribiland PR4EN1ELEC User And Maintenance Manual preview
Ribiland PR4EN1ELEC
Brand: Ribimex Pages: 68
XPOtool 51678 User Manual preview
51678
Brand: XPOtool Pages: 4

Brands by name

Popular brands

Load more brands