Applicator Startup
(continued)
Caution
Do not pull adhesive sticks from
the rear of the applicator while in
operation. Removing adhesive
from the rear may cause molten
adhesive flow out the rear of the
applicator which
may cause burns
and damage the applicator.
5. Insert 3M Scotch-Weld Hot Melt Quadrack adhesive stick through
the stroke adjuster and transport mechanism (see Figure C).
6. Align flat surfaces of stick as show in Figure D.
!
!
WARNING
Use only with 3M™ Scotch-
Weld™ Hot Melt Quadrack™
Adhesive Cartridges. Use with any
other materials
may cause
hazardous conditions.
Figure D
Figure C
© 3M 2006
6
