![background image](http://html1.mh-extra.com/html/3m/scotch-weld-hot-melt-applicator-ec/scotch-weld-hot-melt-applicator-ec_owners-manual_442737015.webp)
© 3M 2006
13
!
Preventive Maintenance
1. Inspect the nozzle tip every day before startup. Use a Scotch-Brite
®
pad or equivalent to remove accumulated adhesive or foreign matter
from the tip
2. Inspect the adhesive entry track and transport mechanism daily to
ensure it is clear of foreign matter and slides freely.
3. Inspect the applicator once a week. Refer to the Troubleshooting
and Repair Procedures of this manual if necessary.
WARNING
Do not clean or remove the 3M™
Scotch-Weld™ Hot Melt Adhesive
with solvent.
May cause fire.
For
additional health and safety
information see the product label
and Material Safety Data Sheet for
Scotch-Weld Hot Melt Adhesive
used.
Caution
Avoid contact with hot adhesive
and the applicator tip.
May cause
burns.
Wear safety glasses when
using.
Caution
Do not pull adhesive stick from the
rear of the applicator while in
operation. Removing adhesive
from the rear may cause molten
adhesive to flow out the rear of the
applicator which
may cause burns
or damage the applicator.
!
!