9
7.6.1. SCU-300 MENU
For more information about the menu, refer to “8. Menu
functions SCU-300”
• Radio volume
• Ambient (Environmental) listening volume
• Primary Microphone*
• Advanced Settings
• Battery Status
• Radio Silence
• Voice Guide Volume
• NFMI pairing
• Training Mode
• SCU placement
• Auto Power Off
• Warning signals
• RCU Primary pairing
• RCU Primary pairing
• Bluetooth
®
pairing**
• Bluetooth
®
Function Button**
• Primary microphone
• Battery Type
• Radio audio
• System power OFF
• Factory reset
8. MENU FUNCTIONS SCU-300
8.1. RADIO VOLUME
Adjusts the volume of connected external communication
devices and intercom systems. Select one of the 5 preset
volume levels.
8.2. AMBIENT (ENVIRONMENTAL) LISTENING
VOLUME
Adjusts the Ambient (Environmental) volume on connected
headsets. Select one of the preset volume levels.
8.3. PRIMARY MICROPHONE
Select the primary speech communications microphone.
Note:
This menu level is only available when both TEP-300
and ComTac™ VII is connected to the SCU-300.
EN
8.4. ADVANCED SETTINGS
8.4.1. BATTERY STATUS
Performs a battery status check on SCU-300, RCU, TEP-300
and/or ComTac™ VII.
8.4.2. RADIO SILENCE
Silences NIB, NFMI and Bluetooth signals emitted from the
TMAS.
NOTE:
Depending on the connected external communication
device, this setting MAY NOT silence detectable signals
emitting from those devices. Please refer to radio user
manuals regarding radio silence.
8.4.3. VOICE GUIDE VOLUME
Set the volume on the automatic audio messages. Select
between high or low based on the surrounding noise.
8.4.4. NFMI PAIRING
Pairs products to the SCU-300.
8.4.5. TRAINING MODE
Training mode is a test mode. The training mode allows the
user to test which placement of the SCU-300 is the best for
the current situation.
8.4.6. SCU PLACEMENT
Set where you want to place the SCU-300. Select between
chest position (recommended) or waist position.
8.4.7. AUTO POWER OFF
The SCU-300 will automatically turn off after 2 hours if no
buttons are pressed on the SCU-300 during this time.
Note:
The product will not turn off automatically if TEP-300 or
ComTac™ VII is connected and active.
Note:
Press any button to delay auto power off.
8.4.8. WARNING SIGNALS
Enables or disables the different audio messages/warning
signals heard in the headset.
• ON - Enables all warning signals.
• OFF - Disables all warning signals.
8.4.9. RCU PRIMARY PAIRING
Pair the primary RCU with the SCU-300.
8.4.10. RCU SECONDARY PAIRING
Pair the secondary RCU with the SCU-300.
Note:
This menu level is only available when a primary
RCU-300 is already connected to the SCU-300.
8.4.11. BLUETOOTH
®
PAIRING**
Pair the selected Bluetooth
®
unit with the SCU-300.
8.4.12. BLUETOOTH
®
FUNCTION BUTTON**
Transfer the functions of the Function button on the SCU-300
to the PTT II button on the RCU-300. Refer to “11.5 To use
the Bluetooth
®
function”.
8.4.13. PRIMARY MICROPHONE
Select the primary speech communications microphone for
TEP-300 or ComTac™ VII if not paired.
**These features are only available in SCU-300NA WS GE.
*Only available when both TEP-300 and ComTac™ VII are connected to the SCU-300.
