7
PELTOR DECT-Com II
Charger / Holder – DC2064
Charger / holder for charging a standard battery pack DC2033 in a main unit DC2x11, DC2x12
or DC2x15. Charging is indicated with a red LED and takes approx. 12 hours. When charging is
finished, the LED turns green. When the LED is flashing red/green the charger unit is detecting
wrong temperature for charging.
Note!
It is only possible to charge battery pack
DC2033 in this charger.
Included in this package is a universal mains
adaptor with connectors for EU, UK and US.
Choose your appropriate mains connector and
mount it on the mains adapter.
TECHNICAL DATA – Charger / Holder DC2064
Input:
9-15 V =
Charge time of a DC2033:
~ 12 hours
Charging temperature interval:
5°C to 45°C
Ingress protection:
IP42
TECHNICAL DATA – Mains Adapter DC2061
Input:
100 – 240 V
≈
, 50/60 Hz, 400 mA
Output:
9.0 V
1.0 A
PROGRAMMING THE DECT-Com II UNITS
Special software and a programming holder
is available for customizing several functions in the
DECT-Com II system.
Contact an
Authorized Peltor DECT-Com II Dealer*
)
for further information.
WARRANTY
Two year guarantee of conformity with the contractual specifications of the quality and
performance of the goods. “Non-conformity goods“ should be returned to your
Authorized
Peltor DECT-Com II Dealer
, or to one of the
3M / Peltor Repair Centres
.
See
www.3M.com/PeltorComms
on the Internet. Look in section
“Rest of the world”
and find
“CONTACT US”
where you will find contact information.
APPROVALS
Electrical safety:
EN 60 950
EN 62311
EMC:
EN 301 489-1
EN 301 489-6
FCC Note:
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired
operation.
IC Note:
Operation is subject to the following two conditions: (1) This device may not cause
interference, and (2) this device must accept any interference, including interference that may
cause undesired operation of the device. The Term “IC“: before the certification/registration
number only signifies that the Industry Canada technical specifications were met.
See certificate on the last page.
DC2064
DC2061
