Downloaded from Projector.com
5
3M
Multimedia Projector MP8020
1996
Section 3: Set Up
3-1. Cable Connections
It only takes a few minutes to connect the 3M
Multimedia Projector MP8020 to your computer, VCR or
other video device (Figure 3-1).
Laptop or Desktop
Desktop or Laptop
Laserdisc or VCR
(S-VHS output)
VCR (VHS output)
Electric Outlet
Figure 3-1. Typical Cable Configuration
Terminal Connection Panel
Take a moment to look over the input connection
terminals (Figure 3-2) on the side of the projector.
Connect your first input source to the Terminal 1
connectors and your second input source to the
Terminal 2 connectors.
The terminal connectors for VIDEO/AUDIO1 are:
S-Video, Video, Audio-L, and Audio-R.
The terminal connectors for VIDEO/AUDIO2 are:
S-Video, Video, BNC, Audio-L, and Audio-R.
The terminal connectors for RGB1 (computer) and
RGB2 (computer) are: RGB, Audio-L, and Audio-R.
Note
The CONTROL terminal is not used.
Video/Audio2
RGB2
(Computer)
Power Cord
Power Switch
RGB1
(Computer)
BNC Terminal
Video/Audio1
Terminal
Number
Figure 3-2. Input Connection Terminals
