Downloaded from Projector.com
13
3M
Multimedia Projector MP8020
1996
4-3. Memory Function
The MP8020 will retain all picture adjustment settings you make until you either change them again or return
all settings to the factory default. To return picture adjustments back to the factory settings, press the MENU
button to display the on-screen menu and then press the RESET button
4-4. Inverting the Image
The image can be inverted for ceiling mounted applications. Press the MENU
button on the remote
control to display the on-screen menu (Figure 4.1). Use the TRACKBALL to move down the menu and
highlight the Image lines (H-Normal and V-Normal). Use the TRACKBALL or press
or
to move left
or right and invert the image horizontally (H-Normal changes to H-Invert). Move left or right again to invert
the image vertically (V-Normal changes to V-Invert).
Note
Each time you move left or right, the horizontal image first and then the vertical image will alternate
changing their image inversion setting.
4-5. Image Position
The image can be moved vertically or horizontally to center it on the projection screen. When a projected
image is displaying (normal operating mode), press the UP/DOWN
arrow to move the image
vertically or LEFT/RIGHT
arrow to move it horizontally.
Note
An image must be displaying (normal operating mode) to adjust the vertical and horizontal position.
If a menu is displaying (menu operating mode), the arrow buttons will adjust only the menu settings.
4-6. Language
The MP8020 will display the on-screen menus in the following languages:
D
English
D
French
D
Spanish
D
German
D
Italian
D
Dutch
D
Norwegian
Press the MENU
button on the remote control to display the on-screen menu (Figure 4.1). Use the
TRACKBALL to move down the menu until the Language line is highlighted. Use the TRACKBALL or
press
or
to scroll through a list of names for each available language. To display the menu in the
selected language, use the TRACKBALL to move to the next menu line.
Note
The selected language does not display until after you exit the LANGUAGE line.
