16
3M™ MicroTouch™ Display C1700SS Installation Guide
3M Touch Systems Proprietary Information
Windows® Vista
Windows® 2000
Windows® XP
Windows® 9x
Windows® NT
Controllers
MT 7
X
X
X
All current controllers (serial and USB)
TouchWare
(Legacy)
X
X
X
X
EX II series
Serial resistive series
MicroTouch software includes the touch sensor driver and control panel that enables your
touch sensor to work with your computer. Once the software is installed, restart your
computer to load and activate the touch sensor driver. To complete the setup of your
touch display, make sure you calibrate the touch sensor.
Calibrating the Touch Sensor
After you connect your touch display and install MicroTouch software, you must
calibrate the touch sensor. Calibration serves two purposes:
•
Sets the active area of the touch sensor
•
Aligns the touch sensor’s active area to the underlying video
To calibrate the touch sensor, open the touch control panel and select Calibrate. Follow
the directions displayed on the screen. For more information on calibration, refer to the
online help or the user documentation.
