3M Matic 700r, Instructions And Parts List

Page: 8 / 72

3
Important Safeguards
Figure 1-1 – Knife Warning Label
Figure 1-3 – Box Drive Belt Warning Label
This safety alert symbol identifies
important messages in this manual.
READ AND UNDERSTAND THEM BEFORE
INSTALLING OR OPERATING THIS
EQUIPMENT.
Important – In the event the following safety
labels are damaged or destroyed, they must be
replaced to ensure operator safety. A label
kit, part number 78-8098-9177-9 is available as
a stock item or individual labels can be ordered.
See Parts Illustration/List, Section I, pages 66
and 67.
Figure 1-2 – Electrical Warning Label
The "Warning – Hazardous Voltage" label, shown
in Figure 1-2, is attached to the cover of the
electrical control box. The label warns service
personnel to unplug the power supply before
attempting any service work on the case sealer.
The "Warning – Moving Belts" labels, shown in
Figure 1-3, are attached to both sides of the upper
belt guards at the infeed end of the machine. The
labels warn operators to keep hands or loose
clothing away from this area because of moving
belts.
The "Warning – Sharp Knife" label (A), shown in
Figure 1-1, is attached to both sides of the upper
frame at the location of the cut-off knife on the upper
taping head. The "Warning – Sharp Knife" label
(B) shown in Figure 1-1, is attached to the orange
cut-off knife guard on both taping heads. The labels
warn operators and service personnel of the very
sharp knife used to cut the tape at the end of the
tape application.