![background image](http://html1.mh-extra.com/html/3m/ecam-20-mm-d/ecam-20-mm-d_instructions-manual_442558013.webp)
13
78-8140-3820-0-B
8.13 Install the cable clamp by positioning it over the
cable set.
Note: If different-sized cables are used, ensure that the
cable is placed into the correct cable clamp shell
set in the bottom housing.
8.14 Start the center clamp screw and lightly tighten.
Evenly tighten the two outer screws along with
the center screw by alternating between. Torque
the three clamp screws to 30 inch-lbs.
8.15 Place top half of the 3M
™
External Cable Assembly Module (ECAM)
Double Cable Entry Port ECAM-20
mm-D over the bottom half. Align the top and bottom housings and squeeze the halves together evenly.
CAUTION
Do not pinch fibers between halves.
8.16 Start all three of the screws. Then evenly tighten
all three screws by alternating between screws.
B
A
A