11
78-8140-3820-0-B
8.7
Trim the corners from the mastic, forming points at both ends.
8.8
Wrap the mastic starting .25 inches (6 mm)
from the sheath end. Wrap the mastic evenly
around the cable. DO NOT STRETCH THE
MASTIC.
8.9
The release liner can be wrapped around the mastic collar temporarily to keep the mastic clean. Be
sure to remove the liner before installing the cable into 3M
™
External Cable Assembly Module (ECAM)
Double Cable Entry Port ECAM-20 mm-D housing. Relocate washers next to the collar. Repeat for
second cable.
