3M Touch Systems Proprietary Information
6
Installation Addendum
Moisture deflector
25-foot serial/VGA cables
50-foot serial/VGA cables
Security hardware (including security screws)
Note
: A NEMA 4X panel gasket mounting kit ships with
all ET 355 monitors.
For details on the options, refer to the ET 350 Monitor
User’s Installation Guide.
Specifications,certifications, and
standards
The specification and certification information below
shows only points that apply to the ET 355 monitor and is
different from specifications and certifications that appear
in the ET 350 Monitor User’s Installation Guide and the
Installation Addendum for the ET 350 Monitor with Heater
and ET 355 Monitor HL with Heater.
For additional details on specifications, standards, and
certifications, refer to the ET 350 Monitor User’s
Installation Guide and, if you have an ET 35X monitor with
heater, the Installation Addendum for the ET 350 Monitor
with Heater and ET 355 Monitor HL with Heater.
AC or DC power supply specifications
Certification marks and standards for
ET 355 Monitor HL
3M Touch Systems support
services
3M Touch Systems provides extensive support services
through our web site and technical support organization.
Visit www.3Mtouch.com, to download touch screen
software and drivers, obtain regularly updated technical
documentation on 3M Touch Systems products, and learn
more about our company.
Whenever you contact Technical Support, please provide
the following information:
Part number and serial number
Current driver version
Important
All options, including VGA and serial cables, must be
considered in the end product.
Wiring methods must be considered in the end product.
Consider conducting a heating test in the end product of which
the ET 355 monitor is a part.
Power source: 3 terminal strip
Marks for ET 355 Monitor HL with AC Power Supply
UL recognized component
1
cUL
CE
Class I Division 2; Groups A, B, C, D; T6
Class II Division 2; Groups F, G; T6
Marks for ET 355 Monitor HL with DC Power Supply
UL Recognized component
1
cUL
CE
Class I Division 2; Groups A, B, C, D; T6
Class II Division 2; Groups F, G; T6
Class I Zone 2
Ex II 3 G/D
DEMKO 02 ATEX 021046 U; EEx nC IIC
Standards
UL recognized component
1
for Pollution Degree 3
environments if:
installed and tested with panel gasket in an enclosure that
meets NEMA 4X/IP66 ratings;
installed with the NEMA 4X hatch kit
UL 60950; Safety Information Technology Equipment
CSA 22.2 No. 60950; Safety of Information Technology
Equipment
EN60950; Safety of Information Technology Equipment
USR (U.S. Recognized) — UL 60950
UL 1604: Electrical Equipment for Use in Class I and II, Division
2 and Class III Hazardous (Classified) Locations.
CSA 22.2 No. 213-M1987: Non-Incendive Electrical
Equipment for Use in Class I, Division 2 Hazardous Locations.
UL 2279, Pt. 15; Standard for Electrical Equipment for Use in
Class I, Zone 0, 1, and 2 Hazardous (Classified) Locations
CSA-E79-15; Electrical Apparatus for Explosive Gas
Atmospheres
EN50021; Electrical Apparatus for Potentially Explosive
Atmospheres
EN50281; Electrical Apparatus for Use in the Presence of
Combustible Dust
1
For use in Pollution Degree 3 environments if installed with the
NEMA 4X hatch kit or the NEMA 4X panel gasket in a UL Listed
enclosure that meets NEMA 4X/IP66 rating.
