3M DFS 700, Installation And User Manual

Page: 5 / 89

Technical Information DFS 700 / 04.2009
1-1
1 Notes on this Document
These operating instructions for the DFS 700 Speed Feedback and Warning System are a
basis for the faultless operation of the 3M
TM Driver Feedback Sign DFS 700 by the operator.
In the operating instructions the equipment is given the abbreviated name DFS 700 .
The responsible installers and operators must read, understand and follow these operating
instructions. Only with knowledge of these operating instructions can errors damage and injury
be avoided and fault-free operation assured.
The operating instructions are to be kept within easy reach of the DFS 700 and accessible to
the operators and maintenance personnel.
3M accepts no warranty and no liability for operating faults or damage that arises as a result of
failure to follow these operating instructions.
Particular subjects are highlighted as follows:
Working and operating procedures, which have to be followed exactly so as to exclude
life-threatening injuries.
Working and operating procedures, which have to be followed exactly so as to exclude
danger to persons.
Working and operating procedures, which have to be followed exactly so as to damage
to or destruction of the equipment.
Technical information to which the equipment operator must pay particular attention.
The picture presentations are numbered sequentially per chapter. Some of the figures have
legends. References to figures in the text, e.g. (7.1 Item 2), mean:
7.1 = Figure 7.1
Item 2 = Item 2 of the legend to the picture.
In the event of technical problems not addressed in these instructions, please contact
your dealer or local 3M subsidiary.
NOTE