3M DFS 700, Installation And User Manual

Page: 39 / 89

Technical Information DFS 700 / 04.2009
6-11
6.4.4 Connect the DFS 700 and PC via Bluetooth adapter
(1) Insert the Bluetooth adapter into the USB 2.0 interface of your PC.
(2) Install the Bluetooth adapter from the supplied driver CD. Alternatively, install using the
Hardware Assistant and enter the drive containing the Bluetooth adapter’s driver CD as
the search location.
(3) After installation the Bluetooth symbol with a stylised “B” on a blue background appears
in the Windows taskbar.
(4) Right-click with the mouse on the Bluetooth symbol and have the Bluetooth environment
searched. Switched-on DFS units within radio range (up to a maximum of 20 m) are
displayed. The device IDs begin with “DFS…” followed by the serial number of the DFS.
Search Bluetooth environment DFSAA09580906
(5) Right-click with the mouse on the device symbol and create a paired connection. The
Bluetooth PIN of the DFS unit is initially "0000“ (for security reasons change it later! see
Section 6.4.6). If successful, a red check symbol appears next to the device symbol.
Create paired connection
The paired connection remains permanent and only has to be renewed if the Bluetooth
PIN changes or either the PC or the DFS breaks the paired connection.
(6) Right-click with the mouse on the device symbol and select the serial port as the
connection. Green arrows appear and the COM Port of the virtual serial connection is
given.
Connect serial port
(7) Select Bluetooth instead of USB in the DFS-CAS connections (see Figure 6-12) and
select the COM port given in the previous step in the corresponding connection settings
(see Figure 6-13).
(8) All other steps to communicate with and configure the DFS 700 are to be carried out as
described in Section 6.4.6.