3M AccuGlide II STD 3 Inch, Instructions And Parts List

Page: 8 / 40

3
Specifications
1. Tape:
For use with “Scotch” brand pressure-sensitive film box sealing tapes.
2. Tape Width:
48 mm [2 inches] minimum to 72 mm [3 inches] maximum.
3. Tape Roll Diameter:
Up to 405 mm [16 inches] maximum on a 76.2 mm [3 inch] diameter core.
(Accommodates all system roll lengths of “Scotch” brand film tapes.)
4. Tape Application Leg Length - Standard:
70 mm
±
6 mm [2-3/4 inches
±
1/4 inch]
Tape Application Leg Length - Optional:
50 mm
±
6 mm [2 inches
±
1/4 inch] (See "Adjustments – Tape Leg Length", page 13.)
5. Box Size Capacities:
For use with center seam regular slotted containers.
Minimum Maximum
Length – 150 mm [6 inches] Unlimited
Height – 120 mm [4-3/4 inches] (most “3M-Matic” Case Sealers)
90 mm [3-1/2 inches] (with optional 2 inch leg length)
Width – 150 mm [6 inches]
When upper and lower taping heads are used on “3M-Matic” case sealers, refer to the respective instruction
manual specifications for box weight and size capacities.
6. Operating Rate:
Conveyor speeds up to 0.40 m/s [80 FPM] maximum.
7. Operating Conditions:
Use in dry, relatively clean environments at 5
°
to 40
°
C [40
°
to 105
°
F] with clean dry boxes.
Important – Taping heads should not be washed down or subjected to conditions causing moisture
condensation on components.
7. Taping Head Dimensions:
Length – 457 mm [18 inches]
Height – 560 mm [22 inches] (with tape drum)
Width – 130 mm [5-1/8 inches] (without mounting spacers)
Weight – Packaged: 8.6 kg [19 lbs.] Unpackaged: 7.7 kg [17 lbs.]
Limited by
Case Sealer